Internet Speed Test
Press start to measure download, upload and ping in about 20 seconds.
Loading the tool...
When to use it
Check before a video call
Press “Start test” a few minutes before a meeting and look at upload, ping and jitter rather than download. Upload carries your camera feed, and a high ping or a jumpy jitter value is what usually makes calls freeze or sound robotic.
Find the weak spot in your home
Run the test next to the router, then again in the room where you actually work. A big drop between the two points to Wi-Fi coverage; if the number stays low next to the router too, try a cable and compare.
Compare Wi-Fi with a cable
Test once over Wi-Fi and once with your laptop plugged in by Ethernet. If the cable result is close to your plan and Wi-Fi is much lower, the bottleneck is the router or signal, not your internet line.
How to use
- Pause streaming or downloads on other devices.
- Press start and wait about 20 seconds.
- Compare Wi-Fi and wired results to see where the slowdown is.
How it works
Unlike most tools on this site, this test has to use the network: it measures ping, download and upload by exchanging test data with Dagochim's own server endpoints on Cloudflare (/api/ping, /api/down, /api/up), using several parallel streams. Only random test bytes are sent, and no files or results are stored; the number reflects the path to our server, so it can differ from your plan speed.
FAQ
It's slower than my plan.
Wi-Fi signal, router performance and other devices can lower results. Test over Ethernet, then contact your provider if it's still slow.
What is ping?
The round-trip time to the server. Lower is better for gaming and video calls.
Is any data sent to a server?
Yes, by design. A speed test has to exchange data with a server, so random test bytes are sent to and from Dagochim's Cloudflare server. No personal files are sent and results are not stored.
What is a good internet speed?
It depends on the use. Browsing, email and music need very little, HD streaming is comfortable at roughly 5 to 25 Mbps per stream, and 4K streaming or several people online at once is better served by 25 Mbps and up. Ping and jitter matter more than raw speed for gaming and calls.
What is the difference between Mbps and MB/s?
Mbps is megabits per second and MB/s is megabytes per second. One byte is eight bits, so divide the Mbps number by 8: a 100 Mbps connection tops out around 12.5 MB/s for downloads, and real file transfers are usually a bit lower.
Why do I get a different result every time I test?
Time of day, how busy your network is, Wi-Fi signal and the server path all change the number. Run it two or three times at different moments and use the typical value. Pausing streaming and downloads while testing helps.
What does jitter mean and what is a bad value?
Jitter is how much your ping changes from one measurement to the next. A steady connection has low jitter; a high value means choppy audio and lag spikes in calls and games even when your download speed looks fine.
Does the test use a lot of data?
It exchanges test data with our server for about 20 seconds, and the faster your connection is, the more data that is. That is fine on home broadband, but on a metered mobile plan you may prefer to test on Wi-Fi.
Last checked: October 8, 2026 · Dagochim team
Related tools
What Is My IP
See your public IP address and ISP.
Everyday toolsWhat Are My PC Specs
See your GPU, CPU threads, RAM and display info.
Hardware testsMic, Webcam & Speaker Test
Check your microphone, camera and left/right audio.
Hardware testsRefresh Rate Test
Check if your monitor runs at 60, 144 or 240 Hz.
Hardware testsPassword Generator
Strong random passwords and breach checks.
Everyday tools