Monitor Refresh Rate Test

Your refresh rate appears within a few seconds. Make sure your 144 Hz monitor isn't stuck at 60 Hz and that frames aren't being dropped.

Loading the tool...

When to use it

Confirm a 144 Hz setting in Windows

After raising the refresh rate in display settings, reload this page. A few seconds later it says which Hz your display looks like and the time each frame takes.

See if battery saver lowers the refresh rate

Press "Restart" once while plugged in and once on battery saver. If the number drops on battery, power settings are the reason.

Compare 60 Hz and 144 Hz motion by eye

In "Motion comparison (UFO test)", change "Speed" and watch the moving objects. A higher refresh rate shows less smear and stutter.

How to use

  1. Open the page and wait 3-5 seconds for the Hz reading.
  2. Frequent red bars in the frame time graph mean dropped frames.
  3. In the UFO test, the top row should look smoother than the rows below. If the rate is lower than expected, follow the tips below.

How it works

The refresh rate is estimated from the median interval between requestAnimationFrame callbacks, which the browser fires once per screen refresh, and missed frames are shown on a frame-time graph. It only measures the monitor the browser window is on, and nothing is sent or stored.

FAQ

My 144 Hz monitor shows 60 Hz.

In Windows, go to Settings > System > Display > Advanced display and choose 144 Hz. Older cables or battery saver mode can also limit it to 60 Hz.

I use two monitors and results look odd.

The browser follows the monitor its window is on. Move the window and press Restart.

Why 143.9 Hz instead of 144?

That's normal. Many monitors run at slightly off-nominal rates and measurements have small errors. The nearest standard value is shown too.

Is anything sent or saved?

No. The measurement runs in your browser and nothing is sent or stored.

What is the difference between Hz and FPS?

Hz is how many times the display redraws per second, while FPS is how many images a program produces per second. The "Average FPS" here is the measured screen update rate.

What are "Dropped frames"?

Frames that arrive at least 1.5 times later than expected. They appear as spikes on the "Frame time graph". If there are many, close other programs or check browser hardware acceleration.

Is a large "Jitter (std. dev.)" bad?

It shows how uneven the gaps between frames are. A smaller value means updates are arriving more evenly.

Last checked: October 8, 2026 · Dagochim team

Related tools

🧰 See the full new/used PC checkup order →