Gamepad Tester

Connect a controller and press any button to see every input live, check whether the sticks return to center, and test vibration.

Loading the tool...

When to use it

Check a used controller as soon as it arrives

Connect it and press any button, then press every button in turn and watch the diagram. Cover the triggers and d-pad, and glance at "All button values" to see numbers change.

Test a stick that seems to drift

If a character walks on its own in games, press "Hands off for 3 s and test" and let go of both sticks. The left and right stick each report whether they look centered, with an average and a maximum value.

Tell several pads apart

With two or more controllers plugged in, pick one under "Choose a gamepad". The info line lists the button count, axes and vibration support so you can tell which one is yours.

How to use

  1. Connect your gamepad via USB or Bluetooth and press any button.
  2. Press buttons and triggers to see them light up. Move the sticks to see the dots follow.
  3. Run the 3-second hands-off test for stick drift, and try the vibration buttons.

How it works

This page reads your controller through the browser's built-in Gamepad API and redraws buttons, triggers and stick positions on every frame, which also makes stick drift easy to spot. Your controller input is not sent or stored and nothing is installed; the vibration test only works if your browser exposes vibration for that controller.

FAQ

Nothing shows after plugging in.

Browsers only expose a gamepad after you press a button. If it still doesn't appear, try another USB port, reconnect Bluetooth, or use Chrome or Edge.

What is stick drift?

The stick reports movement while untouched. If values stay above the dead zone with hands off, it's drifting. Raising the in-game dead zone often helps.

Vibration doesn't work.

Rumble works with most Xbox and DualSense controllers in Chrome and Edge. Firefox, Safari and some Bluetooth connections don't support it.

Is any data sent from my controller?

No. Button and stick input is read locally through the Gamepad API and is not sent or saved.

Does it work with PS5, Xbox and Switch controllers?

If your browser recognizes it as a gamepad, you can check it. The info line shows whether the mapping is standard or non-standard, and a non-standard pad may not match the drawing.

Do wireless Bluetooth controllers show up?

Pair the pad with your system first, then press any button. It is read the same way as a wired one. If it does not appear, try a cable first.

What does the "Dead zone" setting decide?

Small values inside this range are treated as normal when you let go of a stick. A larger value ignores tiny offsets, and a smaller one makes the check stricter.

Last checked: October 8, 2026 · Dagochim team

Related tools