Dead Pixel & Backlight Bleed Test
Show solid full-screen colors to spot dead pixels and light bleed.
Loading the tool...
When to use it
Inspect a new monitor on day one
Press "Start full-screen test" and step through black, white, red, green and blue. If you spot a bright or off-color dot, photograph it while the return window is still open.
Check for backlight bleed in a dark room
Dim the room, show the black screen and look at the corners from about 1 m. Cloud-like bright patches are bleed. Phone cameras exaggerate it, so trust your eyes.
Try to free a stuck pixel
If one dot stays lit, set "Box size" and "Run time", press "Start flashing" and place the box over the problem pixel. When it ends, check whether the dot has recovered.
How to use
- Press start to go full screen.
- Click or use arrow keys to change colors.
- On black, dim the room and check edges for bleed. Press Esc to exit.
How it works
The test fills the whole screen with solid colors using the browser's fullscreen mode, so dead or stuck pixels stand out, and the flashing pattern can help exercise a stuck pixel. It is plain HTML and JavaScript with nothing sent or stored.
More tips
Dead pixels, stuck pixels, and backlight bleed: what's actually different
A dead pixel happens when the tiny transistor controlling one of the millions of sub-pixels on the screen fails completely. It's permanently off (usually appearing black) or permanently stuck showing one fixed color (usually red, green, or blue). Unfortunately, this is a hardware failure that no software fix or screen-flashing trick can repair.
A stuck pixel is different: the transistor itself still works, but the liquid crystal is temporarily frozen in one state rather than responding to signals correctly. Stuck pixels are more common than true dead pixels, and in some cases, rapidly flashing colors over the exact spot can coax the liquid crystal back into normal operation. That's exactly what Dagochim's stuck-pixel flasher is built to attempt.
Backlight bleed is an entirely separate issue from individual pixels — it's light from the display's backlight leaking out around the edges of the panel rather than being fully blocked by the liquid crystal layer. It shows up as a hazy brightness near the edges of a dark screen (especially black), most visible with the room lights off. Some degree of backlight bleed is common on both IPS and VA panel types, with severity varying unit to unit.
A pre-return checklist for a brand-new monitor
- Dim the room and check a black screen for backlight bleed. A faint glow right at the panel's edges is often within normal tolerance, but one corner being noticeably and distinctly brighter than the rest is worth considering a return over.
- Check a white screen for uneven brightness across the panel, or a yellowish or bluish tint in specific areas (a color uniformity issue).
- Step through solid red, green, and blue screens individually, looking for any pixel showing a different color than its surroundings.
- Check the retailer's dead-pixel return policy in advance (how many pixels are tolerated, and where on the screen) so you know exactly what to cite if you need to request an exchange.
Does the stuck-pixel flasher actually work?
Dagochim's stuck-pixel flasher rapidly cycles red, green, blue, black, and white across a defined area of the screen, which is a widely used (if informal) remedy intended to nudge a frozen liquid crystal back into normal responsiveness. Many users report success with this method, but it isn't an officially guaranteed repair and it may simply not work for a given stuck pixel. Pick a duration between 2 and 20 minutes, drag the flashing box over the exact problem spot with your mouse, and give it time. It has no effect on a genuinely dead pixel, since that's a hardware failure rather than a temporarily frozen state.
FAQ
I found a dead pixel. What now?
Check your retailer's return policy quickly, as windows are often short.
Is it dust or a dead pixel?
If the dot stays in the same spot across colors, it's likely a pixel defect.
Is anything uploaded?
No. The test only displays colors on your screen; nothing is sent or saved.
How do I move through the test and exit it?
Click, Space or the right arrow goes to the next screen and the left arrow goes back. Press Esc to leave the full-screen test.
I see bands on the "Gradient (black to white)" screen.
Visible steps in a gradient are called banding. Check your color depth and gamma settings in the monitor or graphics options. Mild banding can simply be how the panel behaves.
Is the flashing box safe to use?
You must first agree to a notice that flashing content will appear, and people sensitive to light should skip it. Dead pixels that are black usually do not come back with this method.
Last checked: October 8, 2026 · Dagochim team
Related tools
Refresh Rate Test
Check if your monitor runs at 60, 144 or 240 Hz.
Hardware testsWhat Are My PC Specs
See your GPU, CPU threads, RAM and display info.
Hardware testsKeyboard Tester
Find dead keys and double-typing keys.
Hardware testsMouse Tester
Check buttons, double-click chatter, wheel and CPS.
Hardware testsMic, Webcam & Speaker Test
Check your microphone, camera and left/right audio.
Hardware testsRelated guide
See the How to Test a Monitor for Dead Pixels, Light Bleed and More guide for a step-by-step walkthrough.